Máy đo pH, EC, TDS, Nhiệt độ cầm tay HANNA-Mỹ, HI 991300

2013-11-22 12:30:20

Giá bán:

Mô tả

Thông số kỹ thuật:

Hãng sản xuất: HANNA- MỸ

Xuất xứ: ROMANIA

Bảo hành: 12 tháng đối với thân máy

                 6 tháng đối với đầu điện cực

Thang đo:        pH: (+84) 988628586 pH

EC: (+84) 988628586 µS/cm

TDS: (+84) 988628586 ppm

ºC/ºF: (+84) 988628586 °C (32 - 140°F)

Độ phân dải:   pH: 0.01 pH

EC: 1 µS/cm

TDS: 1 ppm

ºC/ºF: 0.1ºC/ºF

Độ chính xác (at 20°C):          pH: ±0.01 pH

EC/TDS: 2% Full Scale

ºC/ºF: 0.5°C (± 1.0ºF)

Hiệu chuẩn tự động EC/TDS: 1 điểm tại 1382 ppm (conv.=0.5);

1500 ppm (conv.=0.7); 1413 µS/cm.

Hiệu chuẩn tự động pH:1 hoặc 2 điểm với 2 điểm đệm đã được nhớ

(4.01 / 7.01 / 10.01 or 4.01 / 6.86 / 9.18).

Hệ số EC/TDS:           Lựa chọn giữa 0.45, 0.50 (mặc định),

0.55, 0.60, 0.65, 0.68,0.70, 0.75, 1.00 ppm = 1 µS.

Bù nhiệt:         pH: Tự động từ 0 to 60°C;

EC/TDS: tự động từ 0 to 60°C với lựa chọn bước nhảy

β = 0.0,…1.8, 1.9 (mặc định), 2.0,2.1, 2.2, 2.3, 2.4% / °C

Điện cực:HI 1288đo pH/EC/TDS với đầu cảm biến nhiệt độ, cáp dài 1.2m,

cổng kết nối DIN.

Nguồn cung cấp:pin 4 x 1.5V AAA

Nhiệt độ môi trường:0 - 50°C (32 - 122 °F); RH 100%

Kích thước: 143 x 80 x 38 mm

Cung cấp bao gồm:Thân máy, đầu dò, dung dich đệm pH 4.01(20ml) và pH

7.01 (20ml). Dung dịch chuẩn EC (20ml), dung dịch chuẩn TDS (20ml), dung

dịch vệ sinh điện cực, pin(20ml), hướng dẫn sử dụngvà hộp cứng đi hiện trường

 

 

  HI 991300

  • Automatic one or two point calibration
  • Multi-level LCD display; The meters display the current measurement simultaneously with the current temperature.
  • On-screen tutorial messages for calibration and setup
  • HOLD; The HOLD button freezes readings on the display for manual recording
  • Automatic Temperature Compensation
  • BEPS (Battery Error Prevention System) alerts the user in the event that low battery power could adversely affect readings
  • Measure pH, EC/TDS and temperature with one probe
  • Battery % displayed on startup
  • Easy to clean and keep clean

 

HI 991300 has been designed to offer you  pH, conductivity, total dissolved solids and temperature measurements all in a slim, lightweight, portable unit. From purified to brine water measurement, you can select the meter which will work best with your range of conductivity for greater precision.

There are only 2 buttons, yet you can select from a range of calibration buffers and even the temperature scale (°C or °F) most familiar to you. The housing is waterproof and rated for IP 67 conditions.

The HI 1288 pre-amplified multiparameter probe features an easy to clean sensor and a cloth junction that can be pulled longer to increase the life of the probe. To ensure against interference from transient electrical noise, a solid-state amplifier is integrated into the HI 1288.

User selectable features include different TDS factors from 0.45 to 1.00 and a range of temperature coefficients (β) from 0.0 to 2.4% for greater consistency and reproducibility. Standardized buffer recognition values are also selectable.

This instrument easily fits in the palm of your hand and the bottom probe connection ensures the electrode cable doesn’t get in your way. The large, multi-level LCD displays the primary reading, temperature and calibration guides simultaneously.

 

 

Order Information:
HI 991300 is supplied with HI 1288 multiparameter probe, HI 70004 pH 4.01 buffet solution sachet, HI 70007 pH 7.01 buffer solution sachet, HI (+84) 988628586 µS/cm calibration solution sachet, HI (+84) 988628586 mg/L (ppm) calibration solution sachet, HI 700661 electrode cleaning solution sachet, batteries, instructions and rugged carrying case.

Specifications:

Range

pH

0.00 to 14.00 pH

EC

0 to 3999 µS/cm

TDS

0 to 2000 ppm (mg/L)

Temperature

0.0 to 60.0°C (32.0 to 140.0°F)

Resolution

pH

0.01 pH

EC

1 µS/cm

TDS

1 ppm

Temperature

0.1°C (0.1°F)

Accuracy

pH

±0.01 pH

EC

±2% F.S.

TDS

±2% F.S.

Temperature

±0.5°C (±1.0°F)

TDS Conversion Factor

selectable 0.45 to 1.00 with 0.01 increments (default 0.50)

pH Calibration

 automatic, one or two point calibration with two sets of memorized buffers (Standard 4.01, 7.01, 10.01 or NIST 4.01, 6.86, 9.18)

EC/TDS Calibration

 automatic, 1 point at 1382 ppm (CONV 0.5)
at 1500 ppm (CONV 0.7)
at 1413 µS/cm (others)

Temperature Compensation

pH

Automatic

 

EC/TDS

Automatic with selectable ß from 0.0 to 2.4%/°C with 0.1 increments

Probe

 HI 1288 PVC body, pre-amplified multiparameter probe with internal temperature sensor, DIN connector and 1.2 m (3.93’) cable (included)

Battery Type / Life

 1.5V AAA (3) /approximately 500 hours of continuous use. auto-off after 8 minutes of inactivity

Environment

 0 to 50°C (32 to 122°F); RH max 100%

Dimensions

 152 x 58 x 30 mm (6.0 x 2.3 x 1.2”)

Weight

 205 g (7.2 oz.)



SẢN PHẨM LIÊN QUAN


Liên hệ: